Input Module 'A' :
Door1 - Lighting 1 - Lighting 2 - Aux Heater Fan - Aux 1 - Aux 2
Door2 - Aux 3 - Aux 4 - Aux 5 - Aux 6 - Aux 7 - Aux 8
| Function | Part# | Brochure | Manual | Notes |
| Master Controller | 00-00778-000 | |
|
Provides timing and control as well as lighting outputs 1&2 and aux outputs 1&2. |
| Switch Adapter | 00-00853-000 | This adapter allows Carling Contura II switches to be plugged directly into the adapter. It is aranged on 1" centers. This can be programmed to be input module 'A' or 'B'. (see input module descriptions below) | ||
| Switch Adapter | 00-00862-000 | This adapter is the same as above but is arranged on 1.03 centers to allow use of Carling mounting panels. This can be programmed to be input module 'A' or 'B'. (see input module descriptions below) | ||
| Input Module 'A' | 00-00813-000 | These two modules provide the ability to use any type of switch desired. Input Module 'A' : Door1 - Lighting 1 - Lighting 2 - Aux Heater Fan - Aux 1 - Aux 2 |
||
| Input Module B' | 00-00813-100 | Input Module 'B' : Door2 - Aux 3 - Aux 4 - Aux 5 - Aux 6 - Aux 7 - Aux 8 |
||
| Aux Heater | 00-00771-000 | Provides three outputs for a two or three speed blower motor. Multiple modules may be used to provide simultaneous control of multiple blower motors. | ||
| Aux Output | 00-00785-000 | This module provides 3 outputs which are operated from input 'B' modules. It provide outputs for combinations of Aux3 to Aux 8 depending on module jumper/switch settings. Two modules may be used to access all 6 Aux input 'B' channels. | ||
| Door Control | 00-00787-000 | Provides for control of electrically operated doors. This module provides for an external key input, and sensitive edge detection with or without an edge switch. |
|
Wiring diagram |
|
Wiring diagram |